Core Specifications

Test Point: Standard: 256 Point, MAX 7680 point

Operating System: WIN XP / WIN 7 / WIN 8 / WIN 10 / WIN 11

Power Supply: AC100V-120V, 200V-240V / 50Hz-60Hz / 1000W

Test Method: Manual press type, manual fixture type, inline type

Test Item: MAX: 100,000 Steps

Analog Hardware

DC voltage source: 0 ~ +/-10V, precision: 5mV

DC current source: MAX 100mA, precision: 10uA~1mA

AC voltage source: 10Hz ~ 1MHz, precision: 1Hz~10Hz

Voltage Test: 0 ~ +/-100V, precision: 3mV~50mV

Current Test: 1uA~200mA, precision: 1uA~1mA

Test Range and Conventional Precision

Resistor

• Modes: Constant Current / Constant Voltage / AC Phase
• Range: 0.01Ω~40MΩ
• Accuracy: 0.5%~3%

Capacitor

• Modes: AC voltage / constant current / AC Phase
• Range: 1pF~1F
• Accuracy: 1%~3%

Inductor

• Mode: AC Phase
• Range: 10uH~60H
• Accuracy: 1%~5%

General Functions

• Current source: 0.1uA~100mA (0.5%~5%)
• Voltage measurement: 0~100V (0.5%~3%)
• Diode/transistor test: 0~10V (0.5%~1%)

Optional Hardware

TESJET technology: The upgraded version can measure even smaller ICs and connectors

Frequency test: Maximum 200 MHz, accuracy 1 Hz – 50 Hz

LED module: LED color and brightness test

Audio analyzer: Audio analyzer and signal-to-noise ratio, THD, THD+N

Instrument Access: Support external burn-in equipment, electronic load and oscilloscope, etc.

DUT Power Module

1 High-voltage DC constant current power supplier: 10uA~100mA / 100V(MAX)

1 High-voltage DC constant voltage power supplier: 10V~100V / 100mA(MAX)

2 Programmable power supplier: 1~20V, 0.5A~2A, 20Watt, current measurement 10uA~2A (Constant voltage current limiting)

4 fixed output power: ±12V, +5V, +24V / 1000mA(MAX)

Supports external AVR: USB/GPIB/COM external AVR

Serial Test Module

2 sets serial test channel, rate can be up to 2MHz

Serial communication protocol: IIC, SPI, UART

Boundary scan function: JTAG interface scan and functional test

16 channels digital IO port: Vih: 0.8-4.6V; Voh: 0.1-4.9V